AtlasVR
EN/DEBook a demo

Home / Solutions / Hazardous materials

Health & safety

Train hazardous-materials handling - with zero real risk

With VR training for hazardous materials, your people learn to read the GHS hazard symbols and store hazardous substances correctly, with zero real-world risk.

Hazardous materials VR training
The challenge

You can't safely rehearse a chemical spill or incorrect storage on the real thing. So high-risk procedures get taught from slides - and only really tested when something goes wrong. Yet a leak or a tipped-over container can contaminate soil, water and groundwater long-term, and fuels and chemicals add a fire and explosion risk.

What you will train

GHS hazard symbols and storage - practised safely

Labelling

The nine GHS hazard symbols

Recognise and explain the nine GHS hazard pictograms - explosive, flammable, oxidising, gas under pressure, corrosive, acute toxicity, harmful or irritant (the exclamation mark), serious health hazard and hazardous to the aquatic environment - and derive the right protective measures.

Storage

The storage station

Bring it up to the required standard: oil drums in a spill tray (secondary containment) under weather protection, gas cylinders chained against falling over.

Storage

Order in the container

Store drums and canisters inside, on a spill tray there too. No label, no storage; absorbent within reach, walkways clear, no food or drink. Finally, lock the container and keep the key safe.

Storage

The site tank

Judge when a site tank must not be operated - for example when its orange plate is missing or its periodic inspection is overdue.

Oil spills on the ground and on water are part of the construction-site module: VR construction site safety and HSE training.

How it runs

In a course or at work: a building block of your hazardous-materials instruction

Step 1

The VR session

Each person trains individually in a VR headset for around 45 minutes, guided by audio instructions and with immediate feedback. AtlasVR ships the VR headsets, Meta Quest 3 or 3S, pre-configured.

Step 2 · optional

The reflection

Straight after, 20 to 30 minutes in three phases: experience, understand, transfer. Each person then writes down one concrete measure on an action card.

Optional

Success check and record

A short knowledge test, the action card with its reasoning or a practical check on site - no exam infrastructure needed. Every completed training run is reported to the AtlasVR Dashboard, which can be switched off on request. A training record is available on request.

At a training center

As a half-day course on one topic, or in a multi-week course with one VR session a week and a synthesis round at the end. The module stands alone and fits into existing courses.

In your company

As in-house training in small groups, with reflection and a follow-up. Your people practise handling hazardous substances without production downtime and without real environmental damage.

Language: German; English and more languages on request.

Partner and place of use

In use at Campus Sursee

Developed with Campus Sursee

In the VR Umwelthalle, this module is called “Gefährliche Güter” (modules 9+10). AtlasVR developed the VR Umwelthalle, a virtual construction site for environmental topics, with Campus Sursee. The real Umwelthalle stands on its campus, and the VR version is in use there. The Swiss Federal Office for the Environment (FOEN) and the Albert Koechlin Stiftung supported the project.

FAQ

Common questions

How do you train employees in handling hazardous materials?

With the VR training from AtlasVR for handling hazardous materials, in use at Campus Sursee: employees practise in a VR headset what can hardly be rehearsed safely for real - reading the GHS hazard symbols, storing and labelling containers correctly, bringing the storage station up to standard. An optional reflection straight after carries it over to their own workplace.

What are the nine GHS hazard symbols?

The GHS hazard pictograms are explosive, flammable, oxidising, gas under pressure, corrosive, acute toxicity, harmful or irritant (the exclamation mark), serious health hazard and hazardous to the aquatic environment. In the VR training, your people learn to recognise and explain each one and derive the right protective measures.

Is it suitable for any industry?

Yes: correct storage and labelling of hazardous substances is part of HSE (health, safety and environment) training in every trade and industry. The setting is a virtual construction site with a storage station, a container and a site tank.

Does it help with compliance?

Yes: the VR training is a standardised, repeatable and documentable instruction measure that can be used as a building block of the instruction required by law. Every completed training run is reported to the AtlasVR Dashboard, which can be switched off on request, and a training record can be generated on request. Company- and site-specific instruction and the risk assessment stay with the employer, and the training does not replace legal advice.

How long does the training take?

Around 45 minutes in the VR headset. In a course or company training, the optional reflection of 20 to 30 minutes follows.

What hardware do I need?

Meta Quest 3 or 3S as standard, or the Pico 4 Ultra Enterprise on request, pre-configured by AtlasVR, which also handles rollout and maintenance. The training comes as a training package or tailored to your own specifications.

Which languages are available?

German; English and more languages on request.

Where is the VR training for hazardous materials in use?

In use at Campus Sursee, the development partner of the VR Umwelthalle, a project supported by the Swiss Federal Office for the Environment (FOEN) and the Albert Koechlin Stiftung.

Get started

Bring this module to your team

Book a demo and see this module in action on your own procedures.